Sp Falsh Tool Errors & Solutions

COMMON ERRORS THAT OCCURS WHEN USING SP FLASH TOOL & HOW TO SOLVE THEM


Here are some errors and solutions associated with SP Flash Tool


S_FT_ENABLE_DRAM_FAIL (4032) 

This sometimes occurs when you are trying to flash a wrong ROM to your device.

If you are sure that the firmware you are using is the exact one of your device, format the phone before you flash it.


S_NOT_ENOUGH_STORAGE_SPACE (1011)

This error pops up when size of the firmware (ROM) you are trying to flash is bigger than the space given on the phone.

Try using another version of sp flash tool. Sometimes this error occurs when using a wrong ROM.


S_UNSUPPORTED_OPERATION (1040)

The scatter file loaded is wrong. load the scatter file of your device.


S_COM_PORT_OPEN_FAIL (1003)

This error is seen when the com ports on your PC are disabled.

Try enabling com ports in your BIOS


S_COM_PORT_OPEN_FAIL (1013)

This error is just almost like the the 1003 error. Check if your com ports are available if not enable them. But most of the time using a new version of SP Flash Tool solves this problem.


S_UNSUPPORTED_VER_OF_DA (1022)

If you get this error, Use a newer version of SP Flash Tool.


S_DA_EXT_RAM_ERROR (3001)

Connection problems. Check USB cord or use another port.


S_DA_EMMC_FLASH_NOT_FOUND (3144) 

Wrong scatter file used


S_FT_DOWNLOAD_FAIL (4008)

Change USB cord or

Use Battery to flash the phone or

Change the version of SP Flash Tool. (Older versions preferable)


S_INVALID_DA_FILE (5002)

Use another version of SP Flash Tool



=>> Download All Versions of SP Flash Tool from here

=>> Learn how to flash MTK Android Devices Using SP Flash Tool From here

Please Leave a comment after using this Tutorials
Report if you cannot solve any of these issues.