DOWNLOAD TECNO P3 STOCK ROM

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because
 flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)

To Flash any of the ROMs below,
Extract the file downloaded
Launch UpdateTool.exe which is inside the Android 2.3 Update Tool folder
Click START
Make sure battery of phone is about 25%
Turn off the phone
Connect phone to PC while holding volume down button
Wait for process to complete.

 

TECNO P3 SPECS

Android 2.3.5 (Ginger Bread)

Dimensions - 115.8 x 62 x 11.7 mm
3.5-inch Touchscreen, 320 x 480 , 165 ppi

800MHz dual-core Processor

512MB RAM
512 MB Internal Memory
Supports up to 32GB microSD

3 MP Rear Camera, LED Flash
0.3 MP Front Camera

Dual SIM
EDGE / GPRS
HSDPA
WIFI 802.11 b/g/n
bluetooth 2.0

1400mAh Battery

TECNO P3 STOCK ROM
P3-D107-CY-A1-V0.10.3-S0925
DOWNLOAD ROM

TECNO P3 STOCK ROM ETISALAT VERSION
DOWNLOAD ROM

TECNO P3S STOCK ROM
P3S-D107-Safaricom-N6
DOWNLOAD ROM


The ROM below was made using stock recovery.

TECNO P3 STOCK ROM BACKUP
DOWNLOAD ROM

To flash this ROM backup to your device,

Download and extract the ROM
Create an new folder in your SD Card
Copy ROM contents into the new folder created in your SDcard
Boot into stock recovery (Press and hold volume up + Power for about 5secs)
Use volume keys to navigate to Backup and Restore
Select Restore with Power Button
Select the folder you copied the contents of the ROM
Wait for process to complete..

Please Leave a comment after using this ROM
Report it you cannot download this file.