How To Unbrick Tecno N3 Using Universal Android AIO Flasher
Below are instructions on How to Unbrick Tecno M3 Using Universal Android AIO Flasher.
Requirements: Your device battery should be at-least 45-50 percent charged to perform the Flashing process.
Step 1: Boot your device into fastboot mode. Remove battery, Press and hold volume - (down) button and connect the device to your computer, Release the volume - button about 5 secs after the logo displays.
Step 2: Download and extract Android AIO Flasher on your Computer. On the extracted folder you will see the following files.
Step 3: Launch the Android AIO Flasher.exe
Step 4: Click on the AIO Flasher Tab.
Step 5: Tick Boot.
Step 6: Click Select File.
Step 7: Browse and locate the path of the firmware and select the boot.img file.
Step 8: Tick Erase.
Step 9: Click Flash.
Step 10: Wait until you see "writing sys.yaffss2.img OK" before you know boot.img is flashed to the device. This process can take about 2 mins.
Step 11: Now you have to flash sys.yaffs2.img file.
Step 12: Tick System.
Step 13: Click select file (browse and select the sys.yaffs2.img file)
Step 14: Tick Erase.
Step 15: Click Flash.
Step 16: Wait until you see "writing sys.yaffs2.img OK" before you know boot.img is flashed to the device. This process can take about 2 mins.
Step 17: Disconnect device from computer.
Step 18: While holding volume + (up) button connect the device back to the computer.
Step 19: Keep holding the volume button until you enter the Android 3e stock recovery menu. Using volume + & volume - key to navigate.
Step 20: Select "wipe cache" and press the Power button to enter.
Step 21: After wiping cache, Select "wipe data/factory reset" and press the Power button to enter.
Requirements: Your device battery should be at-least 45-50 percent charged to perform the Flashing process.
Step 1: Boot your device into fastboot mode. Remove battery, Press and hold volume - (down) button and connect the device to your computer, Release the volume - button about 5 secs after the logo displays.
Step 2: Download and extract Android AIO Flasher on your Computer. On the extracted folder you will see the following files.
Step 5: Tick Boot.
Step 9: Click Flash.
Step 10: Wait until you see "writing sys.yaffss2.img OK" before you know boot.img is flashed to the device. This process can take about 2 mins.
Step 11: Now you have to flash sys.yaffs2.img file.
Step 12: Tick System.
Step 17: Disconnect device from computer.
Step 18: While holding volume + (up) button connect the device back to the computer.
Step 19: Keep holding the volume button until you enter the Android 3e stock recovery menu. Using volume + & volume - key to navigate.
Step 20: Select "wipe cache" and press the Power button to enter.
Step 21: After wiping cache, Select "wipe data/factory reset" and press the Power button to enter.
Step 22: After wiping cache and data/ factory reset, Restart Device!
Follow on Instagram
0 comments:
Post a Comment
We'll love to hear from you and we appreciate your fantastic feedback!
Get latest Firmware, Tutorials, Tools & Drivers on our new Website @ https://romshillzz.net. Thank you!