Monday, July 18, 2016

How To Flash MTK Android Devices Using Miracle Box

Using the Miracle Box is quiet complicated to some people, although to some its easier!
On this post i will show you on how to flash MTK Android devices Using Miracle Box.

Requirements
  1. MTK Android Stock ROM download here
  2. Download Miracle Box Setup here or use Cracked Version
  3. Download Miracle Box Drivers here
Tools & Drivers updates here

STEPS >>

  • Launch Miracle Box
  • Click MTK
  •  Select Write
  • Select Format ALL[Android] (Optional but recommended)
  • Click on the folder-like button to select Stock ROM/FIRMWARE on the location it is saved
  • After Selecting Stock ROM/FIRMWARE,
  • Click on the Start button
  • Connect device holding volume + and volume - key or power key only
  • When device is connected, Select Block will pop-out, Click OK
  • Patiently wait while the process completes
  • Once the process has been completed, it displays the following
 Write Done.
 >>Total time: 5 mins 58 s (depending on the time taking)

Follow the Screenshots below or read the tutorials above






WARNING!
Flashing will erase all of your data
All described operations you are doing at your own risk.



==> Learn how to flash SPD Android devices Using Miracle Box from here




WhatsApp +234 81 009 99057
Facebook.com/romshillzz
Twitter @romshillzz
Email: romshillzz@gmail.com

DONATE!
Donation of any kind is acceptable.

MY NAIJA GUYS SHOW SOME LOVE BY SENDING RECHARGE CARDS [MTN & AIRTEL]

  26 comments:

  1. hello,pls i have downloaded the miracke box and drivers....but i keep getting error"cannot connect box, please cable box"

    ReplyDelete
    Replies
    1. Do you have a Miracle Box? If you don't have a Miracle Box Use the Cracked Version Download Cracked Setup from here

      Delete
  2. that is the particular stuff i downloadwd.....

    miracle loader is working...can i also use that

    ReplyDelete
  3. OK..
    thank a lot....I have flashed it..... but I made a big mistake....I don't backup my imel n nvram......and am getting invalid imel and nvram WiFi error.my 3g is no longer working..I have restored the imel with chamelphone but its still not working

    but I recently performed a full backup with twrp recovery.when I boot to recovery and click on restore,noting shows there...any guide pls to fix it

    ReplyDelete
  4. Replies
    1. WhatsApp +2348100999057 add me up for more info!

      Delete
    2. how do one restore backup one did with miracle box

      Delete
    3. By writing back the backup you did.

      Delete
  5. am using the phone in 2g edge right now and noting else get data except uc mini which I am using now
    or email me goodluckokereke@gmail.com

    ReplyDelete
    Replies
    1. I don't think your are ready to learn. He gave you his WhatsApp contact and you are giving him option. You need the help no RomShillzz.
      Let us try and appreciate RomShillzz efforts - Thumb Up Shillzz!

      Delete
  6. The tutorial was clear enough, that I was able to flash LAVA iris 820 stock ROM (https://goo.gl/8IFjHS) on the first go.

    ReplyDelete
  7. guys im from kenya, but i love the site... ROMSHILLZZ! I APPRECIATE...GODBLESS BRO.I,VE FINALLY MANAGED TO FLASH MY TECO C9 WHICH GOT BRICKED....

    ReplyDelete
  8. Hello. I flashed my clone samsung phone s7 930fd with miracle box crack and the phone wont now turn on after completion of the entire process. How do i revive it?

    ReplyDelete
  9. Note:
    1. Samsung clone devices do have many variants so do not tick preloader & uboot when flashing any of them, Except when the phone is totally dead.
    2. Check & make sure your battery is fully charged.
    3. If a backup was made before flashing the device, re-flash again with the backed-up ROM to revive device
    4. If no backup was made, then download all ROM variants for the device flash then all until you get the one that matches or revives the device to normal Thanks.

    ReplyDelete
  10. This article is very much helpful and i hope this will be an useful information for the needed one. Keep on updating these kinds of informative things...
    Mobile App Development Company in Chennai
    Web Design Company in Chennai
    Web development Company in Chennai

    ReplyDelete
  11. It's interesting that many of the bloggers your tips helped to clarify a few things for me as well as giving.. very specific nice content. And tell people specific ways to live their lives.Sometimes you just have to yell at people and give them a good shake to get your point across.
    Mobile App Development Company
    Android app Development Company
    ios app development Company
    Mobile App Development Companies

    ReplyDelete
  12. My tetecno l8plus dead after flashed with ur backup rom as posted for tecno l8 plus not knowing is for ordinary l8 and not l8plus but it was so unfortunate that the phone is stopping at downloading boot8 with error message and system is still discovering it but stopping with error message. I have downloaded the original rom which is for the l8plus itself pls help me out am fed up

    ReplyDelete
  13. No Charging not powering but system is still discovering itkindly help me out it is a new phone

    ReplyDelete
  14. No Charging not powering but system is still discovering itkindly help me out it is a new phone

    ReplyDelete
  15. My tetecno l8plus dead after flashed with ur backup rom as posted for tecno l8 plus not knowing is for ordinary l8 and not l8plus but it was so unfortunate that the phone is stopping at downloading boot8 with error message and system is still discovering it but stopping with error message. I have downloaded the original rom which is for the l8plus itself pls help me out am fed up

    ReplyDelete
    Replies
    1. Unscrew the device, Charge device battery using a Universal Charger, Once the battery is fully charged, try the process again but this time don't select Format All[Android]
      Thanks!

      Delete
  16. The battery is fully charged before it dead and you know how strong is the battery (5050 mah) and am very sure the battery is live and charged with voltages on it. I have unscrew it removed and connected the battery but the same thing repeating

    ReplyDelete



We'll love to hear from you and we appreciate your fantastic feedback!
Get latest Firmware, Tutorials, Tools & Drivers on our new Website @ https://romshillzz.net. Thank you!

Firmware Categories
 TECNO
 INFINIX
 GIONEE
 HUAWEI
 ITEL
 MICROMAX
 THL
 VODAFONE

What are you looking for?


We have moved! If you can't find what you're looking for, kindly head to our new website @ https://romshillzz.net | or our forum https://forum.gsmtutors.com

Sponsored

GSM-Tutors Forum

.

Instagram Follow on Instagram Follow RomShillzz

Email: romshillzz@gmail.com

WhatsApp ✆: +2348100999057


Featured Post

How To Write IMEI On MTK Android Devices Using Inferno Tool

This is a tutorial on how to Write IMEI On MTK Android Devices Using Inferno Tool. With this tutorial you can write IMEI on any version (inc...

Popular Posts

Recent Comments

Support