Friday, January 13, 2017

How To Flash & Unlock Coolsand Feature Phones (Basic Phones)

I have specially made this post for you guys.
I have been receiving mails, & messages on how to flash & unlock coolsand feature phones (basic phones)
This is what you have been asking for right here!

Please kindly note that this is the first time we are using cracked version to make tutorials using miracle box.
This is so because I'M facing some little challenges with my Miracle Box due to its dongle license has expired - looking forward to doing that before this year runs out.

First thing first
Lets go straight to the point.

STEPS >>

USING MIRACLE BOX

UNLOCKING COOLSAND FEATURE PHONES (BASIC PHONES)

  • Download & install Miracle Box Setup from here or use Cracked Version
  • Download Coolsand/RDA feature phones (basic phones) drivers from here
  • Launch Miracle Box
  • Click on Coolsand/RDA
  • Select Format
  • Under Choose type: select Auto Detect Coolsand CPU OR Coolsand Boot 1 OR Coolsand Boot 2
  • Power off device
  • Connect your coolsand feature phone via USB
  • Once you have connected your device, Press & Hold "0" button key until it displays Open USB Download
  • Immediately, Click on Start Button 
  • Patiently wait for device to connect & the process to complete.


Follow the Screenshots or read the tutorials above






USING VOLCANO BOX

UNLOCKING COOLSAND FEATURE PHONES (BASIC PHONES)

  • Download & install Volcano Box Setup from here
  • Download Coolsand/RDA feature phones (basic phones) drivers from here
  • Launch Volcano Box
  • Click on Coolsand & ...
  • Select Built-in BOOT_B
  • Tick Auto-Detect Pinouts (when using pinout connector) "Good Working with Pinouts"
  • Select Format
  • Click on Run Button
  • Patiently wait for device to be detected
  • Once device has been detected, Patiently wait for the process to complete.


Follow the Screenshots or read the tutorials above




WARNING!
Flashing will erase all of your data
All described operations you are doing at your own risk.

  20 comments:

  1. My name is muritech i will try it

    ReplyDelete
  2. Muritech i have miracle box not crack but is not connect with latset software exept Version 2.4 Solution please

    ReplyDelete
    Replies
    1. Uninstall the old version, download & install the latest version of Miracle Box... Make sure your PC is connected to a strong hotspot network, Launch the Miracle Box & Leave your feedback!

      Delete
  3. Please which phones are coolsand

    ReplyDelete
    Replies
    1. Quick Tips: How To Identify a Coolsand Feature Phones (Basic Phones)
      1. Power off device
      2. Remove and Reinsert the device Battery (do not power on)
      3. Plug a USB Cord, While the device is charging, Press and hold the "0" button key for about 2 - 3 min once it displays "Open USB Download" this means your device is coolsand chip.

      Delete
  4. error: 200 when flashing or formatting coolsand chip with miracle. plz help. thanks

    ReplyDelete
  5. Link for drivers not working. Check on it please. says not found

    ReplyDelete
    Replies
    1. HOW TO DOWNLOAD

      STEP 1: Click on the Download link above, you will be redirected to adf.ly.

      STEP 2: Click on SKIP AD on the adf.ly link and you will be redirected to the drive where the file has been uploaded to - from here you can now download the file.

      Delete
  6. COOLSAND drivers link not working

    ReplyDelete
    Replies
    1. HOW TO DOWNLOAD

      STEP 1: Click on the Download link above, you will be redirected to adf.ly.

      STEP 2: Click on SKIP AD on the adf.ly link and you will be redirected to the drive where the file has been uploaded to - from here you can now download the file.

      Delete
  7. Is there any solution to revive coolsand which was disrupted while writing flash?

    ReplyDelete
    Replies
    1. Using Volcano Box, Connect device via pinout (RX,TX), Flash device.

      Delete
  8. Another way of identifying basic phone chipset is as follows;
    1. When you jack in usb cable and the phone screen shows MASS STORAGE, it is a coolsand chip
    2. When 2 options appear ie charging and com port, that is mtk chip
    3. If 3 options appear on 4n screen ie u disc, pc connectivity and charging, its spd

    note that you just have to jack in the usb without holding any key

    ReplyDelete
  9. Flash model not support bro

    ReplyDelete



We'll love to hear from you and we appreciate your fantastic feedback!
Get latest Firmware, Tutorials, Tools & Drivers on our new Website @ https://romshillzz.net. Thank you!

Firmware Categories
 TECNO
 INFINIX
 GIONEE
 HUAWEI
 ITEL
 MICROMAX
 THL
 VODAFONE

What are you looking for?


We have moved! If you can't find what you're looking for, kindly head to our new website @ https://romshillzz.net | or our forum https://forum.gsmtutors.com

Sponsored

GSM-Tutors Forum

.

Instagram Follow on Instagram Follow RomShillzz

Email: romshillzz@gmail.com

WhatsApp ✆: +2348100999057


Featured Post

How To Write IMEI On MTK Android Devices Using Inferno Tool

This is a tutorial on how to Write IMEI On MTK Android Devices Using Inferno Tool. With this tutorial you can write IMEI on any version (inc...

Popular Posts

Recent Comments

Support