How to flash/unbrick LG Mobile Devices Using Octoplus/Octopus Box

This is a tutorial on how to flash/unbrick LG Mobile Devices Using Octoplus/Octopus Box

Note
Follow the instructions on how to flash this devices carefully from tips bellow
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact FIRMWARE of the device you want to flash because
 flashing a Stock Firmware, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)

Requirments

1. Octoplus/Octopus Box
2. Octoplus/Octupus Box Setup
3. USB Cable or Box Connector USB
4. And of course the Firmware of the LG Device you are about to flash

STEPS >>

• Download and install Octoplus/Octopus Box Setup
• Connect your Octopus Box & Launch the Octopus Box Setup from your PC
• Identify & Select the TAB where your LG Device belongs to (e.g LG Analog Devices, LG Infineon, LG Texas Instruments, LG Qualcomm, LG MTK, LG SEMC)
• Select Firmware
• Connect device using COM or USB Cable (device will enter TAT Mode)
• Click on Write Firmware
• Wait for device to be recognized and get connected
• Once your device has been Connected, Patiently wait for process to complete until its shows you Writing firmware done!

Follow the Screenshots or read the tutorials above

WARNING!
Flashing will erase all of your data
All described operations you are doing at your own risk.