How To Flash Spreadtrum 8810/6820 Devices Using Miracle Box
This is a tutorial on how to flash Spreadtrum (8810/6820) both Android & Non Android Devices Using Miracle Box
Requirements:
STEPS >>
Note.
if device hangs on boot or does no boot completely
do not write flash (firmware)
{Using Miracle Box} Click on SPD, select device chip (8810/6820), tick Format, Click on Start button and connect device.
Requirements:
- Download Miracle Box Setup here
- Download Miracle Box Crack here (Alternative If you don't have a miracle box)
- Download Miracle Box Drivers v1.00 here
STEPS >>
- Download Miracle Box (Either Box Setup or Cracked Version from the above links)
- Extract & Install
- Launch
- Click on SPD
- Select Write
- Select this Chip from Choose type option SPD8810/6820
- Click on the folder icon to select firmware
- Locate & select the appropriate firmware fro that particular device you are about to flash because flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
- Select USB Cable When using USB Cable)
- Select Scan Def (When using Pinout)
- Click on Start Button
- Connect device >> holding volume + and volume - button of your device at the same time or holding power button only
- Patiently wait for device to be recognize
- Once device hs been recognized, Flashing begins (Erasing Flash...)
- Patiently wait for the process to be completed ( >> Write Completed)
- Disconnect device and Power on
- DONE!
Follow the Screenshots or read the tutorials above
WARNING!
Flashing will erase all of your data
All described operations you are doing at your own risk.
Flashing will erase all of your data
All described operations you are doing at your own risk.
Artikel mengenai flash spreadtrum 8810/8620 sangat informatif.
ReplyDeleteTerima kasih.
Banyak cinta!
Delete