How to Flash And Upgrade Samsung Smart Phones Using ODIN
This is a tutorial on how to flash, upgrade or
unbrick samsung devices using odin.
Download odin (latest version preferred) from here.
Download the exact rom of your device. Check out samsung roms from here.
Launch odin
Make sure only Auto Reboot & F. Reset Time is ticked.
Put your device into download mode by pressing down Volume Down > Home > Power key
Press volume up on the screen that has a yellow triangle to get into odin mode.
Connect the device to the computer.
Added!! will be seen showing the device has connected successfully.
Click on AP (new versions of odin) or PDA (older versions of odin).
Navigate to the folder containing the rom of the device.
Select the rom. (roms names always end with .tar or .md5).
Wait for odin to process the rom.
Click start.
The flashing or upgrading process will now begin.
A green progress bar will be seen at the top left.
This process will take about 8 mins or more (depends on the size of the rom.
When you see PASS! at the top of odin GUI know that you have successfully flashed or upgraded the device
The device will reboot.
First boot after this process takes time. Be patient............
Do a factory reset if phone bootloops:
Follow the steps below
carefully so as to avoid permanent damage on your smart phone.
Download odin (latest version preferred) from here.
Download the exact rom of your device. Check out samsung roms from here.
Launch odin
Make sure only Auto Reboot & F. Reset Time is ticked.
Put your device into download mode by pressing down Volume Down > Home > Power key
Press volume up on the screen that has a yellow triangle to get into odin mode.
Connect the device to the computer.
Added!! will be seen showing the device has connected successfully.
Click on AP (new versions of odin) or PDA (older versions of odin).
Navigate to the folder containing the rom of the device.
Select the rom. (roms names always end with .tar or .md5).
Wait for odin to process the rom.
Click start.
The flashing or upgrading process will now begin.
A green progress bar will be seen at the top left.
This process will take about 8 mins or more (depends on the size of the rom.
When you see PASS! at the top of odin GUI know that you have successfully flashed or upgraded the device
The device will reboot.
First boot after this process takes time. Be patient............
Do a factory reset if phone bootloops:
- Your Samsung Device will now stuck at boot (boot loop). Now, You have to boot into Stock Recovery Mode, To Enable Stock Recovery mode: Press and Hold Volume UP key, Home key, Power key. When Phone vibrates, Release the Power key but keep holding the Volume UP Key and Home key. You will boot into the Recovery Mode.
- In Recovery Mode, Wipe Data/factory reset.
- Once Cache Data is cleared, Select Restart Phone Now from the Recovery menu.
Please leave a comment after using this Tutorials
Report if you cannot do this.
Report if you cannot do this.
0 comments:
Post a Comment
We'll love to hear from you and we appreciate your fantastic feedback!
Get latest Firmware, Tutorials, Tools & Drivers on our new Website @ https://romshillzz.net. Thank you!