Saturday, April 30, 2016

How to use eMMC DL Tool to flash Qualcomm devices


Make sure the device has at least 10% battery life
Do at your own risk!

Download and extract eMMC DL tool from here
Download an extract the Stock ROM of the device you want to Flash or upgrade
Install Qualcomm USB drivers from the extracted folder

Connect the device to PC while holding volume up + volume down. (Some devices require holding only volume up or just volume down)
Once device is connected properly, go to device manager of your PC (Right Click on Computer > Properties > Device Manager)
Expand Port (COM & LPT) and note the port number of Qualcomm HS-Diagnostics
Now launch eMMC DL Tool
Input the COM Port number of Qualcomm HS-Diagnostics after Disk1
Click on FW Path browse button
Navigate and select folder containing the firmware of the device you want to flash
The firmware will be added successfully to eMMc DL Tool

Click DL1 to start flashing or upgrading process
You will see 2 green bars indicating flashing progress
When you see Green Pass, know that flash process is complete

Flashing will erase all of your data
All described operations you are doing at your own risk.

Tuesday, April 19, 2016

How To Change iPhone's IMEI with ZiPhone Tool

  • Download ZiPhone software here
  • Double click ZiPhone on your desktop to extract folder ZiPhone
  • Press the Window key and "R" at the same time to bring up the Run Window
  • Type in cmd and press the ok button to launch the comand prompt
  • Type the following command to navigate to the ZiPhone directory  *cd Desktop/Ziphone
  • eg: cd Desktop/Ziphone  \Desktop\ziphone>
  • Execute the command "ziphone" to see it's possible uses
  • The program will prompt you to put your iPhone into recovery mode. To do this, please hold down both the sleep/wake and power button until you see the Apple logo. Once the Apple logo appears,release only the sleep/wake button until you see the iTunes logo and cable on the screen
  • If you have a 4.6 BL iPhone you can now activate jailbreak and unlock!
  • Just simply type in this command ziphone-u-i a123456789012345 (replace the numbers with the desired imei of your choice)
  • The program will now search for zibri.dat. then it will search for the iPhone. Once found,it will tell you to wait for 2 minutes and 30 seconds
  • After the time,you iPhone will reboot and it will be unlocked with the new imei!!!!

Sunday, April 17, 2016


Flashing Custom ROMs, installing unofficial updates or firmwares, can easily destroy (brick) phone’s system. This often make devices unable to boot again. Thus making a CWM backup of your device is always useful.

This tutorial is based on restoring bricked MTK android smart phones using CWM backups.
Make sure the backup you are using is the one of your device else it will not work.
Make sure your device have at least 25% battery life.
If CWM is already installed on the device just scroll down to second part of this tutorial.

Part 1: Installing CWM recovery to the device

  • Download and install universal android adb drivers from here. 
  • Download SP Flash Tools (latest version preferable) from here. 
  • Download scatter file & CWM made recovery.img of the device you want to restore. 
  • Launch SP Flash tools. 
  • Click on Scatter Loader button. 
  • Select the scatter file of the device. 
  • Tick Recovery from the list. 
  • Double click on Recovery and select recovery.img you downloaded. (This must be a CWM made recovery)
  • Click on Download button. 
  • Connect the device Computer. 
  • Wait for Flashing to complete. A green tick or green circle (for older versions) will be seen on the screen. 
  • Disconnect the phone from the computer.

Part 2: Restoring Device With CWM

  • Download and copy the CWM backup folder to your SD Card.
  • Boot to CWM Recovery by holding Vol. up then press Power button for about 3secs.
  • Use Vol.  up & Vol. down keys to Navigate & select Backup/Restore using Power button.
  • Select Restore.
  • Select the backup you want to restore.
  • Wait for the process to complete (process can take about 15mins).
  • Reboot device when process is complete

Any donation to support this site is highly appreciated!

Enter Amount (₦)

Click here to make donations using U$D

Sunday, April 03, 2016


These are Stock ROMs (Firmware's) for VINKO Feature Phones (Basic Phones). Here we've provided you with direct links where you can download all Vinko Feature Phones (Basic Phones) Stock ROMs (Firmware's). Note: [*] Follow the instructions on how to flash this devices carefully from the links below, I will not take responsibility on whatever may happen to your device. Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can't power on, can't charge and will not be detected by a computer).


Important Notes:

[*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on).

==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here

[*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens.

[*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Vinko Stock Firmware's (Stock ROMs)

VINKO S5 PLUS STOCK ROM - Flash this ROM using sp flash tool

How To Flash SPD Android Devices

Using ResearchDownload or UpgradeDownload Tool:

STEP 1: Download & extract the Stock ROM (Firmware) on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).

STEP 3: Launch ResearchDownload or UpgradeDownload.
STEP 4: Click on the Settings-like button above Port.
STEP 5: Select the PAC File from the Stock ROM (Firmware) you have downloaded.
STEP 6: Click on Start button.
STEP 7: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only.
STEP 8: Patiently wait for the process to complete.

Using Miracle Box:

STEP 1: Download & extract the Stock ROM (Firmware) on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).

STEP 3: Launch Miracle Box.
STEP 4: Click on SPD.
STEP 5: Select Write.
STEP 6: Select device Chip from Choose type.
STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved.
STEP 8: After Selecting Stock ROM (Firmware),
STEP 9: Click on the Start button.
STEP 10: Connect device holding volume + and volume - key or power key only.
STEP 11: When device is connected, Select Block will pop-out, Click OK.
STEP 12: Patiently wait while the process completes.

Please leave a comment after using this ROMs
Report if you cannot download any of these files.

Any donation to support this site is highly appreciated!

Enter Amount (₦)

Click here to make donations using U$D

Firmware Categories

Shop Now!

What are you looking for?

Copyright Protection




✆ WhatsApp: +2348100999057

Featured Post

Join Our Official WhatsApp G.S.M Solution Group

Looking for a fast and reliable way to get solutions for your mobile phones & smart phones? Join our WhatsApp G.S.M Solution Group. ...

Popular Posts

Recent Comments