Wednesday, January 11, 2017

DOWNLOAD GOWIN A2 MT6572 STOCK ROM

Below is the direct link to download the Gowin A2 MT6572 Stock ROM (Firmware).

DOWNLOAD GOWIN A2 MT6572 STOCK ROM

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can't power on, can't charge and will not be detected by a computer).


GOWIN A2 SPECS
Operating System Android 4.4 (KitKat)
Chipset MediaTek MT6572
Processor CPU: 1.3GHz dual-core Cortex-A7. GUP: Mali-400
Storage RAM: 512MB, ROM: 4GB up to 32GB micro SD
Dimension 134.6 x 66.3 x 8.3 mm
Connectivity
2G: GSM 900/1800/1900, 3G: HSPDA 2100, Bluetooth v3.0
Camera
Rear Camera: 2MP, Front Camera: 0.3MP
Battery Capacity 1800mAh

GOWIN A2 MT6572 STOCK ROM

MT6572__alps__android__b807_emmc_72_kk_guangwei_a2__4.4.2__ALPS.KK1.MP7.V1
DOWNLOAD ROM


How To Download:

STEP 1: Click on DOWNLOAD ROM - You will be redirected to needrom.com.
STEP 2: You need to create an account with them.
STEP 3: After creating the account, login your account, now come back and click on DOWNLOAD ROM again and the file will be downloaded.

Note: If you already have an account with them, just click DOWNLOAD ROM & the file will be downloaded automatically.



How To Flash

Using SP Flash Tool:

STEP 1: Download & extract the Stock ROM (Firmware) on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).
STEP 3: Launch SP Flash Tool.
STEP 4: Click on Download.
STEP 5: Select Scatter-loading.
STEP 6: Select the Scatter File from the Stock ROM (Firmware) you have downloaded.
STEP 7: Select Format and click Start.
STEP 8: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only.
STEP 9: Patiently wait for device to be formatted.
STEP 10: After format,
STEP 11: Select Download and click Start.
STEP 12: Connect device & Patiently wait for the process to complete.


Using Miracle Box:

STEP 1: Download & extract the Stock ROM (Firmware) on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).

STEP 3: Launch Miracle Box.
STEP 4: Click on MTK.
STEP 5: Select Write.
STEP 6: Select Format ALL[Android] (Optional but recommended).
STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved.
STEP 8: After Selecting Stock ROM (Firmware),
STEP 9: Click on the Start button.
STEP 10: Connect device holding volume + and volume - key or power key only.
STEP 11: When device is connected, Select Block will pop-out, Click OK.
STEP 12: Patiently wait while the process completes.


Important Notes:

[*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on).

==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here

[*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens.

[*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.



Please Leave a comment after using this ROM
Report it you cannot download this file.

0 comments:

Post a Comment

Firmware Categories
 TECNO
 INFINIX
 GIONEE
 HUAWEI
 ITEL
 MICROMAX
 THL
 VODAFONE

Shop Now!

What are you looking for?

Copyright Protection

.



.


Email: romshillzz@gmail.com

✆ WhatsApp: +2348100999057

Featured Post

Join Our Official WhatsApp G.S.M Solution Group

Looking for a fast and reliable way to get solutions for your mobile phones & smart phones? Join our WhatsApp G.S.M Solution Group. ...

Popular Posts

Recent Comments

Advert